Posted in

How to choose between drawstring and non-drawstring trash plastic bags?

If you’ve ever stood in the household or commercial supply aisle, staring at two stacks of trash plastic bags, one with a flexible little string hanging from each top corner and the other with just a plain, sealed edge, you’ve probably asked yourself this question: drawstring vs. non-drawstring trash bags— which one is actually right for me? As a supplier who’s been working with trash plastic bags for over a decade, I’ve fielded this question from homeowners, café owners, office managers, and even school district facilities coordinators more times than I can count. The truth is, there’s no one-size-fits-all answer, but breaking down the science, practical use cases, and hidden costs of each will help you make a choice that works for your space, your budget, and your long-term goals. Trash Plastic Bags

Let’s start with the basics: what’s the core difference between drawstring and non-drawstring bags? Non-drawstring bags are your standard single-use trash bags—think the thin, black or clear rolls you buy for small kitchen bins, office desks, or bathroom cans. They’re made of linear low-density polyethylene (LLDPE) most of the time, with a sealed top edge that you twist or tie by hand to close. Drawstring bags, on the other hand, add two integrated strings, usually woven into the top’s reinforced edge, that you pull to cinch the bag closed, creating a tight, handle-like grip without fumbling with knots. That small structural tweak is where all the differences start to add up.

First, let’s talk durability—something that matters a lot if you’ve ever had a trash bag break mid-carry, spilling coffee grounds, food scraps, or sharp packaging all over your kitchen floor or office hallway. Early on, I had a client, a small bakery downtown, who swore by cheap non-drawstring bags for their back-of-house trash. They’d often toss full bags of empty pastry tins, sharp butter wrappers, and leftover dough scraps, and within a month, they were replacing 3 to 4 bags a week because they split at the seam or bottom. When they switched to our medium-duty drawstring bags, they saw a 70% drop in breakage rates over the next quarter. Why? The reinforced top edge that holds the drawstring isn’t just for holding strings—it’s thicker, often made with a slightly higher density polyethylene resin than standard non-drawstring bags, to support the tension of pulling the strings. For loads that are heavier or have sharp edges, that extra reinforcement makes a huge difference.

That said, non-drawstring bags aren’t flimsy across the board. We also make heavy-duty non-drawstring bags for large commercial dumpsters—think the 55-gallon black bags used at stadiums or grocery store backrooms. These use cross-linked polyethylene (XLPE), a resin that’s more puncture-resistant than LLDPE, and have a wider, sealed bottom that can hold up to 50 gallons of waste without splitting. The key here is matching the resin type to the load, not just the drawstring feature. If you’re carrying small, light loads (like a desk bin full of paper waste or a bathroom can with only towels), a thin, lightweight non-drawstring LLDPE bag is perfectly durable and unnecessary to overspend on drawstring.

Next, let’s dive into usability—this is where the drawstring vs. non-drawstring debate stops being technical and becomes about real day-to-day hassle. For residential use, many homeowners swear by drawstring bags because of the one-hand closure. If you’re unloading a kitchen can with a full bag, balancing a toddler on your hip, and holding a coffee cup, being able to yank two strings to cinch the bag shut is way easier than twisting a knot. But I also have a lot of residential clients who prefer non-drawstring bags for under-sink bins or small bathroom cans. The reason? Drawstring bags often take up more space on the roll, so if you have a tiny under-sink cabinet that only fits a slim roll of bags, non-drawstring rolls are usually slimmer, holding more individual bags per roll for the same shelf space. For small office spaces with a dozen cubicle bins, same thing: non-drawstring bags are quicker to swap, since you don’t have to adjust loose strings when slipping a new bag over the bin edge.

Commercial use is where usability gets more high-stakes. I had a office facilities manager reach out last year because their team was spending 2 hours a day just tying closed full trash bags across 3 floors. They tried drawstring bags, but complained that the strings would break if the bag was overfilled, and when they accidentally caught the string on a chair leg while carrying, the whole bag would spill. We worked with them to test a hybrid: non-drawstring bags with a “tied edge” that’s reinforced enough for heavy loads, paired with pre-cut twist ties they keep by each bin. They ended up saving 1.5 hours a day, because swapping a non-drawstring bag is 3 times faster than pulling a drawstring, and twist ties cost less than replacing broken drawstring bags every week. For high-traffic spaces like school cafeterias or gyms, that adds up to hundreds of hours a year of labor savings.

Then there’s the often-overlooked factor of waste volume and sustainability. It’s 2024, and almost every client we work with asks about how their trash bags impact landfill use or their carbon footprint. The rule here is simple: drawstring bags require more material to make, on average, than non-drawstring bags of the same capacity. The integrated strings and reinforced top add 10-15% more resin per bag, according to a 2023 study from the Plastics Industry Association’s Sustainability Working Group. That means a pack of 100 drawstring 13-gallon bags uses 1.2 to 1.5 pounds more plastic than a pack of 100 non-drawstring 13-gallon bags. For large businesses that go through 10,000 bags a month, that’s an extra 120 to 150 pounds of plastic going into landfills every month—unless the bags are recyclable. That’s another key point: many drawstring bags aren’t accepted in curbside recycling programs, because the integrated strings can jam sorting equipment. Non-drawstring bags, if they’re made with LLDPE, are accepted at most curbside or drop-off recycling centers. If sustainability is your top priority, that’s a big factor to weigh against the convenience of drawstring.

But wait—what about the actual waste that goes inside the bag, not the bag itself? Drawstring bags are better for preventing litter. A full, cinched drawstring bag is less likely to tear open if it’s set down accidentally or bumped by a cart. For restaurants or outdoor event spaces where trash bags might be left curbside for hours, that extra security can mean less waste blowing into gutters or parking lots, which reduces cleanup costs and reduces your business’s environmental impact. The same 2023 study I mentioned earlier found that commercial sites using drawstring bags had a 40% lower rate of trash litter than those using non-drawstring bags. So it’s not just about the bag’s own recyclability—it’s about how well it contains the waste it’s meant to hold.

Let’s break this down by use case to make it easy, since that’s what most clients care about. If you’re a homeowner with a small kitchen bin, a bathroom can, or a handful of desk bins: non-drawstring bags are almost always the better choice. They’re cheaper, take up less storage space, and for light loads, their durability is more than enough. If you’re a homeowner with a large family that goes through lots of trash, or a space where you carry full bags up stairs or outside to a bin: drawstring bags are worth the small extra cost for the ease of closing them without knots.

For commercial spaces: let’s be specific. Cafés with back-of-house trash that has sharp or heavy items (like empty cans, pastry tins) or outdoor areas where bags might be exposed to wind: drawstring bags are a good pick. They reduce breakage and litter. Offices with small cubicle bins or under-desk trash: non-drawstring is fine, and saves on both cost and storage. Retail stores with large dumpster bins: heavy-duty non-drawstring bags (XLPE) are usually the best, because they hold more waste, use less material, and are cheaper for large volumes. Hospitality spaces like hotels, where housekeeping staff swap bins 10+ times a day: drawstring bags can be a hassle, because staff often rush, and fumbling with strings slows them down—non-drawstring is faster here.

I’ve had a lot of clients come to me after a bad experience making the wrong choice. One restaurant owner tried switching to drawstring bags because he thought they’d cut down on litter, but he ended up paying 25% more per bag and still had breakage because he picked a lightweight drawstring bag instead of a medium-duty one. Another office manager switched to non-drawstring to save money, but ended up hiring a part-time cleaner to pick up spilled trash weekly because their staff was bad at tying knots. The mistake here isn’t choosing one over the other—it’s picking the wrong grade of bag for your specific load, not just the closure style.

A common myth I hear is that drawstring bags are always more expensive. That’s true for small, light loads, but for heavy-duty or large-capacity bags, the price gap narrows a lot because the durability means you’re not replacing broken bags constantly. For example, a 50-count pack of thin 13-gallon LLDPE drawstring bags might cost $8, while a 50-count pack of equivalent non-drawstring bags costs $5. But a 100-count pack of medium-duty drawstring bags that can hold up to 30 pounds might cost $12, while a pack of non-drawstring bags of the same 30-pound capacity costs $10. Over a month, if you go through 200 bags, that’s a $12 difference for drawstring vs. $20 for non-drawstring—because the non-drawstring ones break, so you need more to cover the same waste load. It’s a classic case of upfront cost vs. long-term expense.

Another thing to consider is accessibility. For people with limited mobility—like seniors or staff with back injuries—drawstring bags are far easier to use. Twisting a knot requires dexterity and upper-body strength that many people don’t have, while pulling two strings takes just a simple grip and pull. That’s a big factor for residential users or facilities that serve people with disabilities, like nursing homes. I’ve worked with several senior living communities that switched to drawstring bags for all their resident rooms, and they reported a 60% drop in staff requests for help with trash bags in the first 6 months.

So, putting it all together, how do you actually choose? Start with two questions: 1) What’s the weight and sharpness of the waste I’m putting in each bag? and 2) What’s my main priority: ease of use, low cost, minimal environmental impact, or litter prevention?

If your waste is light (less than 15 pounds), small, and non-sharp, and your top priority is saving money and storage space: non-drawstring is the clear choice. Look for LLDPE bags in the size you need, and make sure they’re thick enough to not tear for your load. Most standard household non-drawstring bags are perfect for this.

If your waste is heavy (over 15 pounds) or sharp, you have mobility needs that make tying knots hard, or you’re in a space where litter is a big concern: drawstring is the way to go. Look for medium or heavy-duty drawstring bags, not the thin, lightweight ones—those won’t hold up for heavy loads.

If you’re torn, test both. We always recommend clients order small test packs of both drawstring and non-drawstring in the size and capacity they need, and use them for a week to see which works better. For a small business, a 50-count test pack of each is enough to tell the difference. For residential use, you can buy small packages from any supply store and test them at home.

As a supplier, my job isn’t to push one product over the other—it’s to help clients find the right fit for their unique needs. I’ve seen people waste thousands of dollars over the years by choosing the wrong bag because they picked based on brand or convenience instead of their actual use case. Whether you’re a homeowner, a small business owner, or a facilities manager, taking 10 minutes to figure out what you need from your trash bags will save you time, money, and hassle in the long run.

If you’re ready to find the right drawstring or non-drawstring bags for your home or business, our team can help you choose the right grade, size, and quantity to match your needs, no matter what your waste requirements are. We work with clients of all sizes, from single-family homes to large retail chains, and can customize orders to fit whatever you need. Reach out to our team to start a conversation about your trash plastic bag needs today.

Egg Plastic Container References
Plastics Industry Association Sustainability Working Group. (2023). Plastic Trash Bag Material and Performance Standards. Retrieved from industry technical reports.
Environmental Protection Agency. (2022). Waste Reduction and Litter Prevention for Commercial and Residential Spaces. U.S. EPA Office of Solid Waste.
National Restaurant Association. (2021). Back-of-House Facility Supply Best Practices. Industry operational guidelines for foodservice businesses.


Anhui Yinling Plastic Industry Co., Ltd.
Anhui Yinling Plastic Industry Co., Ltd. is well-known as one of the leading trash plastic bags manufacturers and suppliers in China. Please feel free to wholesale high quality trash plastic bags made in China here from our factory. For customized service, contact us now.
Address: Anhui Yinling Plastic Industry Co., Ltd., Shuangxin Industrial Park, Tongcheng Economic Development Zone, Anqing City, Anhui Province
E-mail: yinlingmanager@163.com
WebSite: https://www.yinlingplastics.com/